Quick Start

1x PDI Calibration is the application tool that allows the user to perform certain calibrations of a Veronte Autopilot 1x and trim stick inputs. The calibrations that can be performed from this app are as follows:

• Sensors Calibration: IMUs and Magnetometers
• Calibration of Servos

In addition, it also includes a Terminal Manager that can be used, for example, to configure the Microhard internal radio (Veronte Autopilot 1x with hardware version 4.5 internal radio).

Once Autopilot 1x has been detected on Veronte Link, install 1x PDI Calibration.

System Requirements

Before executing this software, users should check the following sections with the minimum and recommended PC hardware requirements.

Minimum requirements

• CPU: Intel Core i5-8365UE
• RAM: 8 GB DDR4
• STO: 256 GB SSD

Recommended requirements

• CPU: 12th Gen Intel(R) Core(TM) i7-12700H 14 cores up to 4,70 GHz
• RAM: 32,0 GB
• STO: 1TB SSD M.2 NVMe PCIe

Download and Installation

1x Veronte PDI Calibration software is available in the Veronte Toolbox platform. From there, users can download and install the application. For more information, please refer to the Veronte Toolbox user manual.

A personal account is required to access Veronte Toolbox; create a Ticket in the user's Joint Collaboration Framework and the support team will create it for you.